Advertisement
I _l"_[',F4
==
-EQ--
DO PLI[/S.SRD--
--TEST--
_;i'_F_ ¸ i_i.i_
_,i_;!iii!iill i
--A,
V, 4,
m-SW.LEVEL
m--CH
SELECT
• The following sound effects may not be available or have no effect with
some sources, or when headphones are used (4 page 11).
• You may experience a reduction in sound quality when these sound
effects are used with some sources. If this occurs, turn the sound effects
off,
Press
[-EQ].
Each time you press the button:
FLAT:
Cancel (no effect is added) (factory preset).
HEAVY:
Adds punch to rock.
CLEAR:
Clarifies
higher sounds,
SOFT:
For background
music.
• To check the current setting, press [-EQ],
i ¸
i I/I
Depending on the source, you can enhance the stereo sound with Delby
Pro Logic II or Super Surround to enjoy the surround
sound effect,
Press
[orlPU[/S.SRD].
Each time you press the button:
Movie:
Movie software
Music:
Stereo sources
Off:
Cancel
You can adjust the amount of bass. The unit automatically
selects the
most suitable setting according
to the type of playback source,
Press
[-SW.LEVEL].
You can select the level from "SUB W 1" (weakest) to "SUB W 4" (strongest).
• To check the current setting, press [-SW.LEVEL].
• The setting you make is retained, and recalled every time you play the
same type of source.
1
--TEST
]
This is one of the ways to get appropriate
surround effects.
When "DVD/CD"
is selected as the source
1
While stopped and no on-screen
display is shown
Press
and
hold
[--TEST]
to output
a test
signal.
• To stop the test signal, press and hold [--TEST]
again,
L: Front left
C: Center
R: Front right
RS: Right surround
LS: Left surround
• There is no output from SW (subweofer)
channel,
2
Press
[VOLUME,
+] or [-]
to set the volume
level
normally
used
for listening.
3
Press
[A]
(increase)
or [V]
(decrease)
to adjust
the
speaker
level
for each
speaker,
• Adjust the speaker levels to the same level as the front speakers,
C, RS, LS:
6 dB to +6 dB
• To adjust speaker level during play
(Effective when playing 5.1-channel
sound or when Dolby Pro
Logic !!/Super Surround
is on,)
Q
Press and hold [--CH
SELECT] to select
the speaker.
L ---_ C ---_ R ---_ RS ---_ LS ---_ SW
¢_
J
• You can adjust SW (Subweofer)
only if the disc includes a
subwoofer
channel and -rlrlPL!!"
is not lit,
• "S" appears on the display when Super Surround is on
(.4. page 30), In this case, you can adjust both surround
speaker levels atthe
same time using [A,
_r].
S:
6dBto
+6dB
(_ Press [A] (increase)
or [T] (decrease)
to adjust the speaker
level for each speaker,
C, RS, LS, SW:
6dBto
+6dB
(L, R: Only the balance is adjustable,)
• To adjust the balance of the front speakers, while "1" or "R" is
selected, press [<
I_].
When
DVD/CD is the source
• Dolby Pro Logic 11 _ is available
/
;.°.°_&l
-"DFIPLI]"
lights when there is effect,
Dolby Pro Logic II is an advanced decoder
that derives 5-channel surround
from stereo sound sources, whether
or not it has been specifically
Dolby Surround
encoded.
When
another
source is selected
• Super Surround
is available
,_
• This does not work when audio is output from HDMI AV OUT terminal,
o
• You can adjust the volume of the surround
speakers
to get the best
cc
surround
effect (-._ right, Adjusting
the volume
of each speaker:
Speaker level adjustments).
Advertisement
