Advertisement
I;Im]LV_ll _ _j
_--'Jk'rL__'_?: ['d_L_'_
There is ghosting when HDMI or
progressive
output is on,
• This problem is caused by the editing method or material used on DVD-Video,
but should be
corrected
if you use interlaced output.
-When
using the COMPONENT
VIDEO OUT terminal, set "Video Output Mode" in Picture Menu to
"480i". (Alternatively,
press and hold [CANCEL]
to switch to "480i".)
- When using the HDMI AV OUT terminal, set "Video Output Mode" in Picture Menu to "480i" output
marked with an " _:". Else, disable the HDMI AV OUT connection and use other video connections.
Make the settings in the following order:
1 Set "Video Mode" in the "HDMI" menu to "Off".
2 Set "Video Output Mode" in Picture Menu to "480i". (Alternatively.
press and hold [CANCEL]
to
switch to "480i".)
• Select "480p" in "Video Output Mode" in Picture Menu.
• The unit's VIDEO OUT terminal outputs the interlaced signal even if "PRG" is displayed.
• When HDMI or progressive
output is on, closed captions will net be displayed.
21
21,
24
Pictures not in progressive
21
output.
6
Closed captions
not displayed,
Distorted sound or noise is heard.
• Adjust the position of the FM or AM antenna.
"ST" flickers
or does not light,
• Use an outdoor antenna.
7
A beat sound is heard.
• Turn the television off or move it away from the unit,
A low hum is heard during AM
• Separate the antenna from other cables,
broadcasts.
"L_"
• The operation
is prohibited by the unit or disc.
--
"Cannot display group xx, content xx"
• You are trying to display incompatible
contents.
"This
disc may not be played
in
• Only DVD-Video discs that include or have the same region number as the one on the rear panel of this
Cover
your region"
unit can be played,
page
No on-screen
display.
• Select "On" in "On-Screen
Messages"
in the "Display" menu,
24
Main unit's screen saver remains
• When using the HDMI connection,
audio/video
information
is continually transferred between the
main unit and the television regardless of which source has been selected on the main unit. This is
normal.
"ANTENNA"
is flashing,
7
"UPDATING"
is flashing,
"NO SIGNL" is flashing.
28
"LOADING"
is flashing.
"OFF AIR" is flashing.
"XM
You can receive only promotional
XM channels.
• The XM antenna is not properly connected.
Check the connection
and make sure the antenna
cable is not damaged,
• The XM antenna is being updated with the latest encryption
code.
Wait a few seconds for the update to complete.
• You may have selected an XM channel that has been blocked, or is no longer available with your
subscription
package.
For inquiry, call XM's Listener Care at 1-800-XMRADIO
(U.S. residents)
or
1-877-GET-XMSR
(Canada residents),
• The XM signal is toe weak, Reorient the XM antenna for better reception.
• The XM antenna is receiving and decoding
the broadcast
information,
Wait a few seconds for
loading to complete.
• The selected XM channel is not currently broadcasting,
Select a different channel.
• The selected XM channel is not available, Select a different channel.
• Supplemental
text information,
such as the song title or artist's name is net available for that
particular
broadcast.
You can change the type of XM channel information
that is displayed
by pressing [FL DISPLAY],
• Your XM Satellite service has net been activated,
or your subscription
has expired.
To activate your XM Satellite service, or to renew your subscription:
- For U.S. residents, visit XM on the Web at www.xmradio.com
or call XM's Listener Care at
1-800-XMRADIO
(1-800-967-2346).
- For Canada residents, visit XM on the Web at www.xmradio.ca
or call XM's Listener Care at
1-877-GET-XMSR
(1-877-438-9677).
You should have your Radio ID ready.
29
29
29
28
o
x
Advertisement
