Advertisement
Numbered
--
buttons
v_
A--
FUNCTIONS--
-TUNE MODE/--
FM MODE
Radio operations
are described
mainly with the remote control.
You can alternatively
use the corresponding
button on the main unit.
_[SELECTOR]
_2[v TUNING
/\]
_3[MEMORY]
Up to 30 stations can be set in each band, FM and AM.
1
2
Press [TUNER/BAND] _1to select "FM" or "AM".
Press
and hold
[ENTER]
_3.
Release the button when "FM AUTO" or "AM AUTO" is displayed,
The tuner tunes to the lowest frequency
and starts to preset all the
stations it can receive into the channels in ascending
order,
• "SET OK" is displayed when the stations are set, and the radio
tunes to the last preset station.
• "ERROR" is displayed when automatic presetting
is unsuccessful.
Preset the channels manually (4 right).
1
2
Press [TUNER/BAND]
_1to select "FM" or "AM".
Press
the numbered
buttons
to select
the channel.
• To select a 2-digit number
eg" 12: [:> 10] "_ [1] "_ [2]
I
I-1-t
l-_
Alternatively,
press [v, /\].
L
I _._
• To perform this step on the main
unit, first press [-TUNE MODE] to select "PRESET", and then
press [v TUNING
A]to select the channel.
When a stereo FM broadcast
is being
received, "ST" lights in the display.
• If noise is excessive
When "FM" is selected
Press
and
hold [--FM
MODE]
on
the main
unit to display
/\ CJ_'°'_;
"MONO".
Press and hold [--FM
MODE] again to cancel the mode.
• The mode is also canceled when you change the frequency.
When "AM"
is selected
Press
[FUNCTIONS]
on the remote
control.
Each time you press the button: BP 2_BP
1
1
Press [TUNER/BAND]
_ to select "FM" or "AM".
Press
[<1<1, I_1_] _2 to select
the frequency,
• When performing
this step on the main unit first press
[-TUNE MODE] to select "MANUAL", and then press [v TUNING /\]
to select the frequency.
• To start automatic
tuning, press and hold [44
IH_] 2 until the
frequency
starts scrolling, Tuning stops when a station is found,
• Presetting the channel
Up to 30 stations can be set in each band, FM and AM.
(_) While listening to the radio broadcast
Press [ENTER] _3,
_1_
(2_ While the frequency
and "PGM" are flashing on the display
Press the numbered buttons to select a channel,
4_
•Tose o,a tnu e
IHII
e.g.12:
I-
q
'_
[_f0]-* It]-* [21
/_
/_
:_
Alternatively,
press [v, A], and then press [ENTER]
3.
A station previously stored is overwritten when another station is
stored in the same channel preset.
FM frequency
step
The step is factory-set to 0.2-MHz, but you can change
it to receive
broadcasts
allocated in 0.1-MHz
steps,
(_) Press [SELECTOR]
to select "FM'.
(_ Press and hold [SELECTOR].
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed,
To return to the original step, repeat steps (1) and (2_.
After changing
the setting, previously preset frequencies
will be cleared
Preset them again.
o
Advertisement
