Advertisement
Notes
on speaker
use
• Use only
supplied
speakers
Using other speakers can damage
the unit, and sound quality will be
negatively affected.
• You can damage your speakers and shorten their useful life if you play
sound at high levels over extended
periods.
• Reduce the volume in the following cases to avoid damage:
-When
playing distorted sound.
-When
the speakers are reverberating
due to a record player, noise
from FM broadcasts,
or continuous
signals from an oscillator, test
disc, or electronic
instrument.
-When
adjusting the sound quality.
-When
turning the unit on or off.
If irregular
coloring
occurs
on your television
The front and center speakers are designed to be used close to a
television,
but the picture may be affected with some televisions
and
setup combinations.
If this occurs, turn the television
off for about 30 minutes.
The demagnetizing
function of the television should correct the problem,
If it persists
move the speakers further away from the television.
• Attaching to a wall
You can attach all of the speakers (except subwoofer)
to a wall,
• The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg (22 Ibs) per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
Q
Drive a screw (not included)
into the wall.
zz zz z A _'
At least
30 mm (13/_d')
O4.0 mm
(5/32")
_-/_
_-
¢57.0 to 9,4 mm
__
JL
('/32" to"/3/')
Wa,,orpi,,ar
--to
G mm l 'J,,' to lJ,')
(_ Fit the speaker
securely onto the screw(s) with the hole(s),
Front and surround
speakers
Caution
• The main unit and supplied
speakers are to be
used only as indicated in this setup. Failure to
do so may lead to damage
to the amplifier and/
or the speakers,
and may result in the risk of
fire. Consult a qualified
service person if
damage has occurred
or if you experience
a
sudden change in performance.
• Do not attempt to attach these speakers to
walls using methods other than those
described
in this manual,
Center
speaker
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
e.g. Center speaker
190 mm
(7'%/')
•
Fitting speaker stands (notincluded)
(except
subwoefer)
Ensure the stands meet these conditions
before purchasing
them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
• The stands must be able to support over 10 k8 (22 Ibs).
• The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker
Metal screw holes
For attacl-fing to
...................................
I
I
speaker stands
/:
;
i/
/
5 mm (3/16'), pitch 0.8 mm (%2") _1_
i
/
Plate thickness plus
/ ]
7 mm to 10 mm
60
mm
(23H
')
(plus %2" to WJ)
Advertisement
