Advertisement
Current as of 06/27/2023
INSTRUCTION MANUAL
Nauticam SE1020-Z Zoom Gear for
Sony E 10-20mm f/4 PZ G Lens
PN# 36176
FORWORD
Thank you for your purchase of a NAUTICAM
product.
At NAUTICAM, we pride ourselves in the ability to
recognize the requirements of professional as well
as amateur underwater photographers and fulfill
them through the innovative designs of our
products. We strive to achieve a high level of user-
friendliness by allowing stress-free installation and
easy operation of all important functions of the
camera.
Each product is individually inspected and water
pressure tested to ensure optimum quality.
Please read this manual carefully before using the
product, this will maximize its performance as well
as its lifetime.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nauticam SE1020-Z
Summary of Contents for Nauticam SE1020-Z
- Page 1 PN# 36176 FORWORD Thank you for your purchase of a NAUTICAM product. At NAUTICAM, we pride ourselves in the ability to recognize the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products.
- Page 2 Protect the interior from moisture with and/or placed within our products. and debris in order to prevent malfunction or NAUTICAM accepts no liability for any loss of leakage. captured images or the inability to capture images even if it is due to the malfunctioning of our •...
- Page 3 PACKAGE CONTENTS • Make sure that you have all the included items listed below before using this product. • If some items are missing or damaged, please reach out to us or the local Nauticam dealer. Plastic C-ring for Zoom Gear...
- Page 4 IDENTIFICATION OF PARTS Plastic C-ring SE1020-Z Zoom Gear Spare rubber grips The tightness between the both gears and the lens can be adjusted by removing or adding these rubber grips on either sides of the plastic C-ring, 6 spare rubber grips are...
- Page 5 2. Insert the zoom gear on a plastic C-ring for the zoom gear until it reaches the flange of the plastic C-ring. 3. To remove the SE1020-Z Zoom Gear, reverse the above steps.
- Page 6 CONTROL THE GEAR 1. The SE1020-Z Zoom Gear can be controlled by zoom/focus knobs of the housing. After mount the camera and lens (with gear installed) on the housing, confirm that the zoom/focus knobs operates correctly.
- Page 7 SPECIFICATIONS CARE AND MAINTENANCE #36176 Nauticam SE1020-Z Zoom Gear for Sony • Soak the housing system in fresh water after E 10-20mm f/4 PZ G Lens each use, during which all control buttons/knobs should be operated a few times to avoid the Dimensions: DIA76.0mm ×...
Need help?
Do you have a question about the SE1020-Z and is the answer not in the manual?
Questions and answers