Connecting The Battery; Disconnecting The Battery - Yamaha VF115 Owner's Manual

(2) Check the battery's charge. If your boat
is equipped with the digital speedome-
ter, the voltmeter and low battery alert
functions will help you monitor the bat-
tery's charge. If the battery needs charg-
ing, consult your Yamaha dealer.
(3) Check the battery connections. They
should be clean, secure, and covered by
an insulating cover. WARNING! Bad
connections can produce shorting or
arcing and cause an explosion.
EMU29335

Connecting the battery

EWM00573
Mount the battery holder securely in a dry,
well-ventilated, vibration-free location in
the boat. Install a fully charged battery in
the holder.
ECM01125
Do not reverse the battery cables. Other-
wise, the electrical parts could be dam-
aged.
(1) Make sure the main switch (on applica-
ble models) is "
on the battery.
(2) Connect the red battery cable to the
POSITIVE (+) terminal first. Then connect
the black battery cable to the NEGATIVE
(-) terminal.
[EWM01913]
" (off) before working
3
1. Red cable
2. Black cable
3. Battery
(3) The electrical contacts of the battery and
cables must be clean and properly con-
nected, or the battery will not start the
engine.
EMU29372

Disconnecting the battery

(1) Turn off the battery cut-off switch (if
equipped) and main switch. NOTICE: If
they are left on, the electrical system
can be damaged.
(2) Disconnect the negative cable(s) from
the negative (-) terminal. NOTICE: Al-
ways disconnect all negative (-) cables
first to avoid a short circuit and dam-
age to the electrical system.
(3) Disconnect the positive cable(s) and re-
move the battery from the boat.
(4) Clean, maintain, and store the battery
according to the manufacturer's instruc-
tions.
Maintenance
1
2
ZMU01811
[ECM01931]
[ECM01941]
83