Table of Contents
Advertisement
Operation
F
(2) After the engine is at idle speed in gear,
move the remote control lever firmly and
crisply to the neutral position.
EMU40473
Stopping boat
EWM01511
Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or im-
pact the steering wheel or other parts of
56
R
ZMU06931
N
ZMU07034
N
ZMU06926
the boat. This could increase the risk of
serious injury. It could also damage the
shift mechanism.
Do not shift into reverse while traveling
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle is closed and the engine re-
turns to idle speed. The stopping distance
varies depending on gross weight, water sur-
face conditions, and wind direction.
EMU27823
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU40671
Procedure for stopping engine
(1) Turn the main switch to the "
position.
OFF
ON
ZMU07033
" (off)
Advertisement
Table of Contents
