Table of Contents
Advertisement
Maintenance
2.
Always keep the battery in a good state
of charge. Installing a voltmeter will help
you monitor your battery. If you will not
use the boat for a month or more, re-
move the battery from the boat and store
it in a cool, dark place. Completely re-
charge the battery before using it.
3.
If the battery will be stored for longer
than a month, check the specific gravity
of the fluid at least once a month and re-
charge the battery when it is low.
NOTE:
Consult a Yamaha dealer when charging or
re-charging batteries.
EMU29332
Connecting the battery
EWM00570
WARNING
Mount the battery holder securely in a
dry, well-ventilated, vibration-free loca-
tion in the boat. Install a fully charged bat-
tery in the holder.
ECM01122
CAUTION:
Make sure the main switch (on applica-
G
ble models) is "
ing on the battery.
Reversal of the battery cables will dam-
G
age the electrical parts.
Connect the red battery cable first
G
62
" (off) before work-
when installing the battery and discon-
nect the black battery cable first when
removing it.
The electrical contacts of the battery
G
and cables must be clean and properly
connected, or the battery will not start
the engine.
Connect the red battery cable to the POSI-
TIVE (+) terminal first. Then connect the
black battery cable to the NEGATIVE (-) ter-
minal.
1. Red cable
2. Black cable
3. Battery
EMU29370
Disconnecting the battery
Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
EMU29391
Checking top cowling
ECM01650
CAUTION:
Be sure the cowling is closed securely
and that there are no gaps. A loose or im-
properly fitting cover could allow water
into the engine.
Check the fitting of the top cowling by push-
ing it with both hands. If it is loose have it re-
paired by your Yamaha dealer.
Advertisement
Table of Contents
