Congatec conga-MA7 User Manual page 2

Revision History
Revision Date (yyyy-mm-dd) Author Changes
0.1 2021-08-20
1.00 2023-01-09
1.01 2023-07-27
1.02 2024-01-15
Copyright © 2021 congatec GmbH
BEU • Preliminary release
•
BEU Added note to section 2.2 "Supported Operating Systems" and updated section 6.3.4 "OEM BIOS Code/Data" because
CSM is no longer supported
• Added power consumption values to table 7 "Power Consumption Values" and 8 " CMOS Battery Power Consumption"
•
Added note about missing non-legacy UART drivers to section 5.8 "UART/CAN"
• Added inrush and current values to section 5.13 "Power Control"
• Added information to section 9 "System Resources"
• Added supported flash device to section 10.4 "Supported Flash Devices"
BEU • Renamed section 1.1 "conga-MA7 Options Information" to "Options Information"
• Added CPU use conditions, Tjunction, and DTR information to Table 2 and 3
•
Added note about a Windows 10 issue with S3 to section 2.2 "Supported Operating Systems"
• Updated section 6.2.3 "Power Loss Control"
• Updated section 6.2.5 "Enhanced Soft-Off State"
•
Renamed section 9.4 "SM Bus" to "SMBus"
BEU • Updated title page
• Updated RoHS Directive in preface section
•
Added note to section 2.7 "Environmental Specifications"
• Added note to section 4 "Cooling Solutions"
• Added note to sections 5.7 "SD Card"
•
Added note to sections 6.1.1 "eMMC"
• Updated section 6.2.3 "Power Loss Control"
MA70m102 2/60