Updating The Device - Reef Factory Thermo control User Manual

To update, log in to the Smart Reef system in the mobile application or
at www.reeffactory.com.
Then press the "Edit" button next to which there is a red indicator
informing about the available update.
In the next one you will see a message about the availability of a new
version of the software. Press "OK" to update the software.
Note that after some updates, your device may need to be
reconfigured or recalibrated.
Manual Thermo control
VIII. Updating the device
After pressing the "OK" button, the device will automatically update.
Do not disconnect the device from the power supply during the update.
If the update doesn't complete within 30 minutes, reset your device.
After the update, check the device settings, in some cases, as
a result of the update, I may change or return to the factory
settings.
Reef Factory 2023
©
14