Advertisement
Quick Links
Advertisement
Related Manuals for Reef Factory Thermo control
Summary of Contents for Reef Factory Thermo control
- Page 1 Thank you for purchasing our device Thermo control Thermo control device manual 1/12...
- Page 2 In order to set up the device correctly, follow the steps below. 1. The picture below shows to see how to connect the peripherals to Thermo control correctly. Notice the designations of power sockets for the cooling and heating systems. Be careful not to confuse them while connecting.
- Page 3 Internet network (wired or wireless) is still active. Try to reconnect to the device and repeat the steps described above. Set up your device in five simple steps. Step one - choose the language you want to use when operating the device. Thermo control device manual 3/12...
- Page 4 (falls below 23°C or rises above 27°C by default - these values are marked in red in the picture below), Thermo control will additionally inform you in such an event by generating a sound alert, which can be switched off by changing the device setup at any time.
- Page 5 Remember that in order to enable communication with the Smart Reef system, the network device which is connected to Thermo control needs to have Internet access. Thermo control device manual 5/12...
- Page 6 When Thermo control successfully connects to your Wi-Fi network, its IP number will appear in the upper left corner of the screen. The appearance of the IP number means that everything is alright. Thermo control device manual 6/12...
- Page 7 If you don’t need to manage your device remotely, you may ignore this step. However, by doing so you will miss out on several additional features, such as access to device updates. Thermo control device manual 7/12...
- Page 8 Step five - congratulations, you have successfully set up your Thermo control device. Thermo control device manual 8/12...
- Page 9 They may disrupt the temperature measurement process. Wait for a while until the device shows the right water temperature. Next, connect all heating and cooling elements to their respective power sockets. Thermo control device manual 9/12...
- Page 10 Tip: move the magnet from left to right along the light bar, to make it possible for the device to detect its presence. The device will signal the resetting process on its display and will start counting down from 5 to 1. When the device is reset, it emits a sound signal. Thermo control device manual 10/12...
- Page 11 (F7 A tube fuses). The fuse in the middle is located a bit higher and protects Thermo control device. Its parameters differ from the parameters of both fuses described above, so it cannot be used to replace them (F400 mA tube fuse).
- Page 12 12. Additional and up-to-date information about the device, its operation and setup can be found at our website www.reeffactory.com, in the relevant product tab. Thermo control device manual 12/12...
Need help?
Do you have a question about the Thermo control and is the answer not in the manual?
Questions and answers