Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reef Factory Thermo view
Summary of Contents for Reef Factory Thermo view
- Page 1 Thank you for purchasing our device Thermo view Thermo view device manual 1/11...
- Page 2 Apart from the Thermo view device itself, the package contains the following elements: a power supply unit, a magnet that can be used to reset the device and an abbreviated manual. In order to set up the device correctly, follow the steps below.
- Page 3 Internet network (wired or wireless) is still active. Try to reconnect to the Wi-Fi module of the device and repeat step 3 as described above. Thermo view device manual 3/11...
- Page 4 Set up your device in five simple steps. Step one - choose the language you want to use when operating the device. Thermo view device manual 4/11...
- Page 5 (marked in red in the picture below, by default: when it falls below 24°C or rises above 26°C), the Thermo view device will inform you about it, by generating a sound alert and displaying messages on its screen. If you connect the device to Smart Reef system, you will additionally receive automatic emails or text messages to your email address or phone number.
- Page 6 Smart Reef system, the network device which is connected to Thermo view needs to have Internet access. When Thermo view successfully connects to your Wi-Fi network, its IP number will appear in the upper left corner of the screen. The appearance of the IP number means that everything is alright.
- Page 7 Thermo view device manual 7/11...
- Page 8 If you don’t need to manage your device remotely, you may ignore this step. However, by doing so you will miss out on several additional features, such as access to device updates. Thermo view device manual 8/11...
- Page 9 Step five - congratulations, you have successfully set up your Thermo view device. Thermo view device manual 9/11...
- Page 10 7. Mount the temperature sensor in your aquarium in such a way that ensures correct temperature measurement (beneath the water surface, deep if possible). The sensor should not be located near any elements that may emit heat, such as the heater or the pump. They Thermo view device manual 10/11...
- Page 11 11. Additional and up-to-date information about the device, its operation and setup can be found at our website www.reeffactory.com, in the relevant product tab. Thermo view device manual 11/11...
Need help?
Do you have a question about the Thermo view and is the answer not in the manual?
Questions and answers