Calibration; User Manual; Info; Software - PCE Instruments PCE-T 420 User Manual

5.4.7 Factory settings
With the help of this option, the instrument can be reset to its factory settings. A distinction is
made between device settings, calibration and data. These can each be reset separately.
When resetting the device settings, default values for the measurement parameters and the
remaining menu options are loaded. A previously performed calibration is retained.
To prevent unintentional resetting of the calibration, this menu is protected with the same code
as is used for calibration. The code is 1402.
ATTENTION:
When resetting the calibration, a previously performed and saved calibration is deleted and a
default calibration for the instrument is selected. It is recommended to perform a new calibration
afterwards.
The reset must be explicitly accepted by ticking the dialogue box.
5.5

Calibration

Under this menu item, the calibration offsets for each thermocouple type can be entered.
The calibration menu is protected by a code query to prevent accidental overwriting of the current
calibration (see Fehler! Verweisquelle konnte nicht gefunden werden. Fehler! Verweisquelle
konnte nicht gefunden werden.).
5.6

User manual

A QR code is displayed in this menu. The QR code can be scanned with an appropriate reader
such as a mobile phone and leads directly to this instruction manual.
5.7

Info

The Info menu displays the model name, serial number and firmware version.
5.8

Software

With the help of the PC software PCE-T 420, the saved data of the data logger can be
transferred from the device to the PC, displayed and archived.
Fig. 7 Factory settings
© PCE Instruments
30