Editing Keys - HP HP700/92 User Manual

Editing Keys
The terminal has editing capabilities that allow you to modify data on the screen.
[ Clear Line
J
[ Clear Display
i
[ Insert Line !
[ Delete Line
I
[ Insert Char
I
[ Delete Char '
Erases all data in a line from the cursor's position to the end
of the line.
I
Shift
I I
Clear Line
I
moves the cursor to the beginning of
the line and erases the entire line of data.
Deletes all characters from the cursor's position to the end
of your data (including those not currently displayed).
l]1iiiiJ
I
Clear Display
I moves the cursor to home position (the I st
column of the 1st line) and then performs the clear display
function.
Inserts a new blank line above the current line. The cursor
moves to the left margin of the new line, and the following
lines move down.
Deletes the line containing the cursor and moves the
following lines up.
Activates Insert Character mode.
(Ins char
appears at the
bottom of the screen.) All subsequent characters you type are
inserted at the cursor.
If
the line becomes full. the letters
pushed to the right margin are lost. Press
~]
again
to return to normal operation. [_§tirtt_J
[ln~
functions like
I
Insert Char
I.
except letters pushed to the right margin are
wrapped to the next line.
Ins Wrap
appears in the status line.
If the next line becomes full, a new line is inserted.
Deletes the character at the current cursor position. Char-
acters in front of the right margin move left to till the gap.
@]]
[]BliliS§rJ
deletes the character at the current cursor
position AND replaces the last character of the line with the
character from the left margiD of the next line.
Using the Terminal 3· 7