Maintenance Schedule - Southern Pride SRG Series Instruction Manual

MAINTENANCE SCHEDULE

WEEKLY:
1. The Combustion Chamber (Firebox) shall be scraped clean to its original surface once each week and shall
be inspected for deterioration or defects. Any significant deterioration or defect that might weaken the
chamber or reduce its insulation capacity shall be immediately repaired.
2. The flue or chimney shall be inspected weekly for the following conditions:
a. Residue that might restrict the vent or create an additional fuel source. The flue or chimney shall be
cleaned before these conditions exist.
b. Corrosion or physical damage that might reduce the flue's capacity to contain effluent. The flue or
chimney shall be repaired or replaced if any unsafe condition is evident.
c. Filters and filtration devices installed in a hood shall be cleaned prior to their becoming heavily
contaminated and restricted.
3.Inspect Burner Head for accumulation of ashes and creosote. Clean as needed.
4. Inspect Convection Fan Blower Wheel for buildup of solids, or out of balance condition. Clean or replace as
needed.
Convection blower wheel
access for inspection/cleaning.
5. Inspect Product Loading and Firebox Door Gaskets. Replace if damaged or leaking.
MONTHLY
Check the overall condition of the smoker once a month. Check the smoker for physical damage and loose
screws. Correct any problems before they begin to interfere with the operation of the smoker.
ANNUALLY
1. Replace burner Electrode / Igniter, located on end of burner blast tube.
Replace burner High Voltage Lead, located on burner just inside service bay.
2.
Six, 1/4-20 bolts secure blower
wheel shroud into place. Remove
these bolts to extract shroud from
the top of the interior of the
smoker.
25 of 28
Removing shroud provides complete
access to convection blower wheel for
cleaning and/or removal of blower wheel.
Copyright 2013 by Southern Pride Distributing, LLC Volume 1