Headset Operation - VTech V2675 User Manual

Your v 2656 cordless telephone is equipped with a 2.5mm Headset Jack for
use with an optional accessory Headset for hands-free operation. If you choose
to use the Headset option, you must obtain an optional accessory Headset, which
is compatible with the v 2656.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511, In
Canada, call at 1-800-267-7377.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on
the Handset. Connect the plug on the Headset cord to the jack on the cordless
Handset (under a small rubber flap). The plug should fit securely. Do not force
the connection.
91-5358-10-00.p65
NOTE :
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be
muted. This is done to limit the effect of
background noise.
Belt Clip
Your v 2656 is equipped with an
attached belt clip. At the top of the
Handset, slide the clip away from the
body of the Handset by pushing on the
indent with your finger.
CAUTION: The Belt Clip is designed
to remain attached to the Handset. Do
not attempt to remove it.
35
35

Headset Operation

1/22/2003, 5:20 PM