Galanz GLFW22WEA5A Instruction Manual page 11

INSTALLATION INSTRUCTIONS
Stacking Kit
In order to stack this dryer, an Galanz stacking kit is required.
Dryer
1" 1"
(25mm) (25mm)
Washer
Only an Galanz dryer can be stacked on top of This washer.
DO NOT attempt to stack this dryer on any other washer, as
damage, injury or property damage could result.
INSTALLATION INSTRUCTIONS
Installation Requirements
TOOLS AND PARTS
Gather the required tools and parts before starting installation
inlet valve for cold water
inlet valve for hot water
inlet hose for hot water with a white nut
inlet hose for cold water with a white nut
5"
(127mm)
2"-5"
(50mm-127mm)
Tools Needed:
Flat-blade screwdriver
Min. 8" long TORX®T20®†
screwdriver
Channel locks
Pliers
Level
#2 Phillips screwdriver
1/4" and 5/16" nut driver
(recommended)
Wire stripper (direct wire
installations)
Tape measure
Utility knife
9