EKSA Air Joy Plus - Gaming Headset Manual

Also See for Air Joy Plus:

Table of Contents

Package List

Driver Diameter: 40mm
Impedance: 32Ω+15%
Sensitivity: 92±3dB
Frequency Range: 20Hz-20KHz
Weight: 204±10g

Microphone Size: Φ6.0*2.7MM
Microphone Sensitivity: -38±3dB
Current: Maximum 0.5mA
Microphone Type: Unidirectional

Type-C Cable Length: 2.0m/6.6ft
USB Extension Cable Length: 0.8m/2.6ft

Environmental Noise Cancellation (ENC) employs dual-mic noise canceling algorithm to achieve crystal-clear communications. Omnidirectional mic with embedded ENC chip collects sounds from all surroundings, unidirectional mic picks up only your voice.

Through the dual mic array, the position of the speaker's speech can be accurately calculated, to protect the voice of the target in the main direction and remove all kinds of inteference in the environment. ENC can effectively suppress 90% of the negative environmental noise, can reduce the ambient noise up to 35dB, and make it easier for gamers to communicate freely. The beneficiary is the other side.

For the convenience of players, this headset has 7.1 surround sound function by default. Both Type-c and USB connected devices can provide 7.1 surround sound.
If you are a professional gamer and want to customize the sound effects, you can go to our official website (https://www.eksa.net/download) to download the driver. Freely configure the sound effects according to your habits.

Note: Our driver can only run on windows system