Table of Contents
Advertisement
Quick Links
IMS-GPS: Clock Module with GPS Satellite Receiver
This product is only compatible with Meinberg's line of modular IMS LANTIME systems.
Visit the [1]
IMS Information Page
The IMS-GPS is a clock module with an integrated GPS receiver for Meinberg's IMS platform. This GPS
receiver is capable of receiving and decoding GPS satellite signals using the included Meinberg [2]
GPSANTv2 antenna
and decoding them to synchronize the integrated clock.
This latest generation of the IMS-GPS module has been developed on the basis of Meinberg's new common
technology platform to allow all users to benefit from new features in the future. Find out more [3] here.
Key Features
- 12 channel GPS C/A code receiver with wide selection of oscillators
- Highly configurable pulse signals, including pulse-per-second and pulse-per-minute
- RS-232 interface for time string output and also for synchronization using time string input and PPS
signal
- Included GPSANTv2 antenna uses downconverter technology to enable long transmission routes of up
to 1100 m (1200 yards)
rev 2023.0908.0935
to learn more.
Page 1/5
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
https://www.meinbergglobal.com
info@meinberg.de
ims-gps-receiver
Advertisement
Table of Contents
Related Manuals for Meinberg IMS-GPS
Summary of Contents for Meinberg IMS-GPS
- Page 1 IMS Information Page to learn more. The IMS-GPS is a clock module with an integrated GPS receiver for Meinberg's IMS platform. This GPS receiver is capable of receiving and decoding GPS satellite signals using the included Meinberg [2] GPSANTv2 antenna and decoding them to synchronize the integrated clock.
- Page 2 Description The IMS-GPS is a 12-channel satellite clock module with GPS technology that has been developed from the ground up specifically for time and frequency synchronization purposes. The IMS-GPS provides a high-precision, high-accuracy time and frequency reference for your Meinberg IMS system and is designed to receive signals from the U.S. Global Positioning System (GPS), allowing your Meinberg system to be used anywhere in the world.
- Page 3 Framing: 7E1, 7E2, 7N2, 7O1, 7O2, 8E1, 8N1, 8N2, 8O1 Time String Formats: [6] , SAT, Uni Erlangen (NTP), Meinberg Standard Time String SPA, Sysplex, RACAL, NMEA0183 (RMC,GGA,ZDA), Meinberg GPS, COMPUTIME, ION, [7] Capture String Output Control Options Pulse, string, and frequency outputs can all either be enabled or disabled depending on clock sync state or left permanently enabled rev 2023.0908.0935...
- Page 4 WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.
- Page 5 Links: [1] https://www.meinbergglobal.com/english/products/modular-sync-system.htm [2] https://www.meinbergglobal.com/english/products/gps-antenna-converter.htm [3] https://www.meinbergglobal.com/english/news/meinberg-security-advisory-mbgsa-2023-04-lantime-firmware-v7-08-002.htm [4] https://www.meinbergglobal.com/english/products/ims-output-modules.htm [5] https://www.meinbergglobal.com/english/specs/gpsopt.htm [6] https://www.meinbergglobal.com/english/specs/timestr.htm [7] https://www.meinbergglobal.com/english/specs/capstr.htm [8] https://www.meinbergglobal.com/english/products/ims-mri.htm [9] mailto:info@meinberg.de rev 2023.0908.0935 Page 5/5 ims-gps-receiver...
Need help?
Do you have a question about the IMS-GPS and is the answer not in the manual?
Questions and answers