Saving Of Ddc Data - Sony VPL-FH30 Service Manual

2-7-3. Saving of DDC Data

1. Connect the AC plug and set this unit to standby state.
2. Double-click QuickAccess2.exe to start the application.
3. Select a target model on the Model pull-down menu.
4. Select Save on the Load/Save pull-down menu.
5 Select DDC on the Data Type pull-down menu.
6. Click the [Next] button.
7. Click the [Browse...] button.
The fi le selection window is displayed.
8. Set the destination fi le for the obtained data as below.
DDC data for INPUT B:
DDC data for INPUT C:
HDMI data for INPUT D: ****_hdmi_2_**
n
**** means model name, and ** means version.
9. Click the [Next] button.
10. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
11. Click the [Next] button.
The window displaying the model name of this unit, serial number, and the fi le path of the destination
of the obtained data to save is displayed.
12. Click the [OK] button.
The saving starts. Completed is displayed after completed.
13. Disconnect the AC plug.
14. Click the [Complete] button.
2-12 (E)
****_a_0_**
****_dvi_1_**
VPL-FH30