1-3-10. DC Fan (For Lamp) and Fuse Connector Assembly
n
When replacing the DC fan, replace the kapton tapes (commercially supplied) and damper (Fan) with the
new one at once.
7 Two screws
(BVTP3 x 12)
8 Lamp duct (Top)
!- Fuse connector
assembly
9 Hook
0 Lamp duct
(Bottom)
VPL-FH30
5 Two kapton tapes
Label side
4 Four cushions
(Fan)
2 Two step screws
1 Harness
3 DC fan (for lamp)
n
When attaching, place with
the label side facing down.
6 Damper (Fan)
1-15 (E)