B Overview Location and Function of Controls Main Unit qa qd9q;4 1 4 5 3 qs qg qh a Lens (page 44) l Terminals (page 4) b Focus ring (page 13) m Remote control receiver The remote control receivers are located c Zoom lever (page 13) at the front and rear of the projector.
Page 3
INPUT B) or a video signal input from the input terminal (INPUT A). Video: DVI-D input terminal (DVI-D) Audio: Audio input terminal (AUDIO) Others d INPUT D (VPL-FH36/FH35/FH31/ h RS-232C terminal FH30 only) RS-232C compatible control terminal Video: HDMI input terminal (HDMI)
Remote Commander b Selecting an input signal (page 12) INPUT key (main unit) Direct input select keys (Remote STANDBY Commander) VPL-FH36/FH35/FH31/FH30: The E INPUT and F keys are not used with this projector. VPL-FX37/FX35/FX30: The D, E, and VIDEO VIDEO F keys are not used with this projector.
*1: Use this key when inputting a One picture display computer signal. But it may not be enabled, depending on the resolution of the input signal and when displaying a two pictures (VPL-FH36/ FH35/FH31/FH30 only). *2: Use this key when inputting a computer signal. TWIN key f Setting the energy–saving mode...
2 Press the V/v key or ECO MODE key You do not need to install batteries in the to select ECO or User mode. Remote Commander, as the power is ECO: Sets each mode to the optimum supplied from the projector. energy-saving value.