Saving Of Ddc Data - Sony VPL-FHZ55 Service Manual

2-6-3. Saving of DDC Data

1. Connect the power cord and set this unit to standby state.
2. Double-click QuickAccess2.exe to start the application.
3. Select a target model on the Model pull-down menu.
4. Select Save on the Load/Save pull-down menu.
5 Select DDC on the Data Type pull-down menu.
6. Click the [Next] button.
7. Click the [Browse...] button.
The file selection window is displayed.
8. Set the destination file for the obtained data as below.
DDC data for INPUT B:
DDC data for INPUT C:
HDMI data for INPUT D: BPJ_WUXGA_Pixie_Audio_HDMI_2_**.dat
n
** means version.
9. Click the [Next] button.
10. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400
11. Click the [Next] button.
The window displaying the model name of this unit, serial number, and the file path of the destination
of the obtained data to save is displayed.
12. Click the [OK] button.
The saving starts. Completed is displayed after completed.
13. Disconnect the power cord.
14. Click the [Complete] button.
2-16 (E)
BPJ_WUXGA_Pixie_VGA_0_**.dat
BPJ_WUXGA_Pixie_VGA_1_**.dat
VPL-FHZ55