1-3-7. DC Fan (For Power Supply Unit (Main))
n
When replacing the DC fan, replace the kapton tapes (commercially supplied) with the new one at once.
2 Nylon rivet
1-12 (E)
1 Open the wire saddle,
then remove the harness.
Label side
3 Fan holder (GA)
Harness
4 Two screws
(BVTP3 x 12)
5 DC fan (for power supply unit)
n
When attaching, place with the
label side facing down.
6 Two kapton tapes
VPL-FH30