Preface - Sun Microsystems Ultra 1 Creator Series Reference Manual

Preface

The Sun Ultra 1 Creator Series Reference Manual contains useful information about the
use and maintenance of a Sun Ultra 1 Creator Series system.
This book is for use with Ultra 1 Creator and Ultra 1 Creator 3D systems only. The
nameplate on your system front panel must be like the nameplates shown in
.
FIGURE P-1
Ultra 1 Creator Series Nameplates
FIGURE P-1
How This Book Is Organized
Chapter 1, "Back Panel Connectors," shows the location of each back panel
connector and gives the pinouts for each connector.
Chapter 2, "Twisted-Pair Ethernet Link Test," presents a full tutorial about
connecting the system to a 10BASE-T twisted-pair Ethernet local area network.
Chapter 3, "Modem Setup Specifications," gives modem settings for Sun Ultra 1
Creator Series systems used in specific network telecommunication applications.
Chapter 4, "Main-Logic Board Jumpers," gives the locations and pin definitions of
user-configurable main-logic board jumpers.
vii