Wall Mounting - VTech IP5821 User Manual

Wall Mounting

The Wall Mount brackets are designed for use on standard wall mount plates only.
Wall mounting is optional.
1. Plug the AC adapters into an electrical outlet, and the DC connector to the bottom
of the Base Unit.
2. Connect the telephone line cord to the jack at the bottom of the Base Unit, and
the other end to the wall jack.
3. Line up the tabs on the wall mount adapters with the holes at the bottom of the
Base Unit. Snap the wall mount bracket firmly in place.
4. Mount the Base Unit on the wall. Position the Base Unit so the mounting studs will
fit into the holes on the wall mount bracket. Slide Base Unit down on the mount-
ing studs until it locks into
place.
9