Table of Contents
Advertisement
Answering System Operation
Connect with the Answering System From a Remote Location
You can access many features of this system remotely from a touch tone phone.
1.
Dial your telephone number.
2.
When the system answers, enter your remote access code (preset to 50).
The system beeps once and then announces the number of new messages.
3. Enter a remote command (see Remote Access Commands).
4. Press * 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press *5 to
hear the menu while remotely connected to the answering system.
Remote Access Commands
Function:
Play messages in a mailbox Press #, then the appropriate mailbox number (1, 2
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Command:
or 3). The system plays new messages. If there are
no new messages, the system plays old messages.
Press #4 while message is playing; press #4#4 to
back up to previous message.
Press #6 while message is playing to advance to
the next message.
Press #5.
Hang up.
Press #9 while message is playing.
Press #7; system plays announcement, then beeps.
Press *7; after beep, record announcement, press
#5 to stop. System plays back announcement.
Press *8, then mailbox number where you want
memo recorded; speak after the beep; press #5 when
finished.
Press *0.
27
Advertisement
Table of Contents
