Table of Contents
Advertisement
Answering System Operation
Setting Up Your Answering System
You can set up one feature at a time, or you can set the features one after the
other, in sequence.
1.
Make sure the answering system is ON.
2. Press MENU until the system announces the feature you want to set.
Refer to the Feature Summary below for a description of the features and
choices.
3.
Press SELECT until the system announces the desired setting.
4.
Press TIME/SET.
5. Press MENU to move on to the next feature, or press a MAILBOX button to
exit feature setup.
Feature Summary
Default settings indicated by
System announces:
System announces: Description/directions:
"Set Security Code"
*
50
"Set Audible Message Alert " When message alert is turned on, the base beeps
*
Off
On
"Set Announce Only"
*
Off
On
"Set Base Ringer"
*
On
Off
"Set Number of Rings"
2
4*
6
Toll Saver
NOTES:
1. To advance the remote access code by increments of 10, press and hold
SELECT .
2.
You can exit feature setup at any time by pressing a MAILBOX button.
*
.
Description/directions:
Use SELECT to choose the remote access code you
will use to access answering system functions re-
motely. You can select any two digit code between 40
to 99.
once every 10 seconds when new messages
have been received.
When you turn announce only on, callers hear
your announcement, but cannot leave a message.
Turn the base ringer on or off.
Choose how many times the phone will ring
before the system answers a call. With toll saver
active, the system answers after two rings when you
have new messages and after four rings when
you have no new messages.
24
Advertisement
Table of Contents
