Low Battery Indication; Battery Care And Maintenance; Connecting To Phone Line - VTech ia5851 User Manual

Setup
LOW BATTERY indication: If the battery power
becomes low, a low-battery icon will be
shown at the lower left corner of handset
display. The handset will beep until you
place the handset in the charger. When in
standby mode, the low-battery display is
shown:

Battery Care and Maintenance

• The maximun standby time on a fully charged battery is six days. A fully
charged battery provides an average talk time of about five hours.
• The battery needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every five seconds.
The screen displays BATTERY
—
• Place the handset in the base so the CHARGING light turns on.The battery
is typically fully charged in 10 hours.
• Keep the battery fully charged by returning the handset to the base after
each use.
• If you repeatedly get a low battery indicator, even after charging overnight, the
battery should be replaced.
CAUTION! To reduce the risk of fire or injury to persons or damage to
the telephone, read and follow these instructions carefully:
Charge the battery provided (or identified for use) with this
product only in accordance with the instructions and limitations
specified in this user's manual.

Connecting to Phone Line

Plug one end of the telephone line cord into the jack on the bottom of the base
unit. Plug the other end of this cord into the wall jack.
NOTE: Before connecting to the phone line, make sure to properly charge the
battery for at least 10 - 12 hours.
BATTERY BATTERY LOW LOW
BATTERY LOW BATTERY LOW LOW and the low battery icon.
Connect to Phone Line
7
BATTERY LOW
1/0 1 12:00
AM