Table of Contents
Advertisement
3.1 Power On
Step 1 Ensure the power cable is fully seated into the panel and wall outlet before powering on the
panel. Please confirm your wall outlet supports a power range of 100V to 240V with
frequency at 50 Hz/60 Hz ± 5% and is fully grounded.
Step 2 Flip the power switch located on the side of the product to "I".
65 " / 75 " / 86 " / 98 " :
The power outlet should be installed near the equipment and should be easily accessible.
3
Power On/Off
22
Advertisement
Table of Contents
