Operation; To Switch On The Product; Operating Modes - Husqvarna AUTOMOWER 435X AWD Operator's Manual

4.1 To switch on the product

WARNING: Read and understand the
safety chapter before you switch on
the product.
1. Push the jog wheel for 3 seconds to switch
on the product.
3 sec
Note: Make sure that the STOP button is
pushed down. If the STOP button is not
pushed down a STOP symbol will appear on
the display.
2. Use the jog wheel to enter the PIN code.
The correct PIN code must be entered to get
access to the menu. If the incorrect PIN
code is entered 5 times, the product is
locked for a time. The lock is extended for
each new incorrect try.
3. Select the desired operating mode and push
the jog wheel. Refer to
page 30 .
4. Push the START button to start the product.

30 - Operation

4 Operation
Operating modes on
If the product is parked in the charging
station, it will only leave the charging station
when the battery is fully charged and if the
timer is set to allow the product to operate.

4.2 Operating modes

®
In the Automower Access menu the following
operation modes can be selected:
• Main area
• Secondary area
• Park
4.2.1 Main area
Main area is the standard operating mode where
the product mows and charges automatically.
Menu structure overview on page 8 .
Refer to
4.2.2 Secondary area
Secondary area mode, the product
In the
operates for a chosen period of time or until the
battery is empty. Refer to
overview on page 8 .
Note: It is recommended to change the operation
Main area before placing the product
selection to
in the charging station.
4.2.3 Park
Park mode is selected the following
When the
operation selections can be chosen:
• Park until further notice
• Park for a specific number of hours
Menu structure overview on page 8 .
Refer to
Menu structure
1035 - 001 - 04.02.2019