Single Service 50Hz Connection - Sundance Spas Export 680 Series Owner's Manual

Single Service (default setting)
1x20A
1x32A
Dual Service
2x16A
1x16A/1x20A
Three Phase Service
3x16A
16.2

Single Service 50Hz Connection

Wiring for export models with a single service breaker. The jumper wiring
is shown below. The included extra White wire (1*) must be installed.
ALL MODELS
Single Service Jumper Wiring
Wire From
1* J33
2 J59
3 J37
4 J46
*Extra connection must be
made
BREAKER TERMINAL
CONNECTIONS
L1 = All components
(Denali/Prado/Prado 5/Tacoma Only) This setting will
turn the heater off any time the pump is running in high
speed.
This setting is for all two pump model spas. Both pumps
and the heater will be allowed to operate at the same
time.
(Denali/Prado/Prado 5/Tacoma Only) Both the jets
pump and the heater will be allowed to operate at the
same time.
This setting is for all two pump model spas. Both pumps
and the heater will be allowed to operate at the same
time.
This setting is for all two pump model spas. Both pumps
and the heater will be allowed to operate at the same
time.
To
J47
J41
J36
J51
4
30A (PMP 2)
F6
A/V
UV
2
680 Export Series
J49
D
L1 BRN
C
N1 BLU
B
A
1*
G-GRN
J35
30A (PMP 1)
J44
P1 2SPD
3
J37
Page 51