Daikin SV1A25AJV1B User Reference And Installation Manual page 75

SV1A25AJV1B+SV4~8A14AJV1B
VRV 5 safety valve unit
4P749917-1 – 2023.09
▪ Loosen the screws lightly without removing them.
▪ Slide and lift the plate.
1
2
2×
PH2
SW8
2 Loosen the damper wires in the switch box:
▪ Cut the cable tie that fixes the connector.
▪ Unplug the damper wire from the connector.
▪ Loosen and remove the damper earth wire screw and detach the damper
earth wire.
▪ Store the screw in a safe place.
a Connector
b Earth wire screw
c Damper earth wire
d Cable tie
3 Cut the cable ties that fix the damper wire to the pipe, and the one that
bundles the damper wire.
b a
a Damper wire
b Cable tie
4 Remove the damper:
▪ Remove the four screws.
▪ Store the screws in a safe place.
▪ Pull the damper from the unit. Do not use excessive force, as the wires on
the back of the damper can get stuck inside the unit.
▪ Carefully guide the wires from the inside to the outside through the small
hole in the unit's metal plate. Take care not to damage the connector and
the earth wire connection.
1
1×
PH2
a
d
b
c
b b
14 Unit installation
|
Installer and user reference guide
75