Table of Contents
Advertisement
8 Configuration
Tue
U5: Auto adress
Push 4 sec. to continue
2 Push
for 4 sec. on the user interface on which you want to
proceed to the quick wizard.
INFORMATION
During the quick wizard, the second user interface displays
Busy and will not be possible to operate.
3 The quick wizard will guide you.
4 For proper operation of the system, the local data on the two
user interfaces must be the same. If this is not the case, both
user interfaces will display:
Synchronization
Data difference detected.
Please select action:
Send data
Confirm
Adjust
5 Select the required action:
▪ Send data: the user interface you are operating contains the
correct data and the data on the other user interface will be
overwritten.
▪ Receive data: the user interface you are operating doesn't
contain the correct data and the data on the other user
interface will be used to overwrite.
6 The user interface requests confirmation if you are sure to
proceed.
Start copy
Are you sure you want to
start the copy operation?
OK
Cancel
Confirm
Adjust
7 Confirm the selection on the screen by pushing
(languages, schedules etc.) will be synchronised from the
selected source user interface to the other one.
INFORMATION
▪ During the copying, both controllers display Busy and
will not be possible to operate. Please do not power off
or disconnect the user interface.
▪ The copy operation can take uptil 90 minutes.
8 Your system is now set to be operated by the two user
interfaces.
8.1.4
To copy the language set from the first to
the second user interface
See "8.1.3 To copy the system settings from the first to the second
user interface" on page 33.
8.1.5
Quick wizard: Set the system layout after
first power ON
After first power ON of the system, you are guided on the user
interface to do initial settings:
▪ language,
Installer reference guide
34
15:10
and all data
▪ date,
▪ time,
▪ system layout.
By confirming the system layout, you can proceed with the
installation and commissioning of the system.
1 At power ON, the quick wizard starts as long as the system
layout was NOT confirmed yet, by setting the language.
Language
Select the desired language
Confirm
Adjust
2 Set the current date and time.
Date
What date is it today?
Sun
1
Jan
2012
Confirm
Adjust
Scroll
Time
What is the current time?
00
: 00
Confirm
Adjust
Scroll
3 Set the system layout settings: Standard, Options, Capacities.
For more details, see "8.2 Basic configuration" on page 34.
A
System layout
Standard
Options
Capacities
Confirm layout
Select
Scroll
4 Confirm by pressing
.
Confirm layout
Please confirm the system
layout. The system will
restart and will be ready for
first startup.
OK
Cancel
Confirm
Adjust
5 The user interface re-initialises and you can proceed the
installation by setting the other applicable settings and
commissioning of the system.
When the installer settings are changed, the system will request to
confirm. When confirmation is complete, the screen will shortly turn
OFF and "busy" will be displayed for several seconds.
8.2
Basic configuration
8.2.1
Quick wizard: Language / time and date
#
Code
[A.1]
N/A
Language
[1]
N/A
Time and date
ERHQ011~016BA + ERLQ011~016CA + EHVH/X16S18+26CA
1
Description
Daikin Altherma - Low Temperature Split
4P313777-1C – 2012.11
Advertisement
Table of Contents
