8695 4985 / C
3 - ELECTRICAL SAFETY
The remainder of the flame cutting installation is powered with 24VDC, +/-12VDC, 24VAC. The igniter manages
high voltage at low intensity.
4 - USE OF PERSONAL PROTECTIVE EQUIPMENT
In the operating phase, and also in the adjustment phase, appropriate personal protection is required (see
document 8695 7050 for more details).
Standard EN 169 requires the use of shade 7 dark glass for the outputs from this process.
5 - INSTRUCTIONS FOR THE USE OF GAS
See section 3, Safe use of gas of the document 8695 7050, particularly the use of oxygen, propane and acetylene.
Oxygen is an oxidant; it activates combustion.
Acetylene is corrosive to copper: do not use brass with more than 70% copper content
Fuel gases are particularly flammable materials
The machine is not designed for operating in an explosive atmosphere.
ESSENTIAL OXYCUTTING
The flame cutting gas cabinet is supplied with 230V power. Risk
of electric shock or electrocution. It is locked with a removable
key.
After the work, lock the cabinet once again before switching on
the power.
Any work on the cabinet must be carried out by approved
personnel. The emergency stop does not shut down the power
supply of the manifold box.
B - SAFETY INSTRUCTIONS
B-5