Table of Contents
Advertisement
Starting the cooking process
INFORMATION!
During the cooking process, you can change the SYSTEM, TEMPERATURE, and TIMER
FUNCTIONS.
INFORMATION!
If no timer function is selected, cooking time will appear on the display unit.
End of cooking by touching
Press the
key to pause the cooking process. End appears on display unit and an acoustic signal
is emitted.
Rotate the COOKING SYSTEM SELECTOR knob to position "0".
INFORMATION!
After the use of the oven, some water may be left in the condensate channel (underneath the
door). Wipe the channel with a sponge or a cloth.
The dash above the key
by touching this key.
While the programme is running, the dash above the key is fully lit.
Until the set temperature is reached, the illuminated dash below the clock
moves left and right.
When the set temperature is reached, the display shows
signal sounds and the dash under the clock becomes fully illuminated.
Extra gratin
The function can only be started after 10 minutes of oven operation (the
dash above the gratin key will be partly/dimly lit). When the function is
confirmed, cooking time 10 minutes (10:00) will appear on the display
unit. Touch the
or
The function can also be deactivated by pressing the gratin key.
The function is used in the last stage of the cooking process when you
add sauce (wet rub) or dry rub onto the food, or when you wish to
additionally brown the crust. A golden-brown crust will form on the dish
during the gratin process, which protects the food from drying out, while
also imparting a more pleasant appearance and better flavour.
is now blinking. Start the set programme
key to set the gratin duration.
, an acoustic
17
Advertisement
Table of Contents
