Table of Contents
Advertisement
Before first use
•
Remove oven accessories and any packaging (cardboard, polystyrene foam) from the oven.
•
Wipe the oven accessories and interior with a damp cloth. Do not use abrasive or aggressive
cloths or cleaners.
•
Heat an empty oven for approximately one hour with the top and bottom heater system at a
temperature of 250 °C. The characteristic "new oven scent" will be released; therefore, ventilate
the room thoroughly during this process.
Switching on for the first time
After connecting your appliance to the power mains or after an extended power outage, 12:00 will
appear on the display.
First, choose and confirm the basic settings.
INFORMATION!
You can change them by touching the keys
. You can set the next setting when you have already set and confirmed the previous one.
When the selected settings are confirmed, the clock will appear on the display unit (if the operating
system selection KNOB is in position 0).
12
1. SETTING THE TIME
By touching the keys
down the value setting key longer, the values change faster.
INFORMATION!
To set or adjust the clock later on, see chapter Extra functions.
2. DISPLAY DIMMER
High light intensity is the default setting. The sign brh and the currently
set value for the display light intensity will appear on the display unit.
Touch the
or
the value setting keys to increase or decrease light intensity.
3. ACOUSTIC SIGNAL VOLUME
Medium volume is the default setting. The sign Vol and the currently set
value for the acoustic signal volume will appear on the display unit. Touch
the
or
key to select the desired level, and confirm. Acoustic signals
can also be switched off.
or
. Confirm the desired setting by pressing
or
you can set the time of day. If you hold
key to select the desired level, and confirm. Use
Advertisement
Table of Contents
