Table of Contents
Advertisement
Installation of input module (optional)
Connecting the signal to the HD/SD-SDI input module
• Insert the input module that meets the input signal specifications.
• Normally, use SYSTEM SELECTOR in "AUTO".
• Any of the format systems can be selected using the SYSTEM SELECTOR button which supports 9 types
(15 formats) of HD signal standards (SMPTE292M) and 2 types of SD signal standards (SMPTE259M)
shown below by toggling between any one of the formats. During the selection process, the input signals
and other information appear on-screen and are cleared automatically.
AUTO
576i
• Automatic detection may malfunction if any unstable signal is connected. If this happens, switch to a system
that is compatible with the signal format using the SYSTEM SELECTOR button.
• Use a 5CFB or superior cable for connection to transmit the image information without error.
(Example: 5CFB, 5CFTX, 7CFB etc.)
32
HD/SD-SDI input module (optional) ET-MD77SD3 (for HD/SD)
HD/SD-SDI
Module
IN
ET-MD77SD3
HD-SDI or
SD-SDI signal
1 080/60i
1 035/60i
480i
720/50p
OUT
SERIAL
LAN
HD-SDI or SD-SDI
signal output
(active through)
(10BASE-T / 100BASE-TX)
For details on the network
function, refer to page 84.
Business
digital VCR
720/60p
1 080/24sF
1 080/25p
LAN terminal
1 080/24p
1 080/50i
1 080/30p
Advertisement
Table of Contents
