Basic Menu Operations; Returning To The Previous Page; Menu Items Shown In Transparent Characters; Menu Items Setting - Panasonic PT-D5500U Operating Instructions Manual

On-screen menus

Basic menu operations

Press the "MENU" button.
The MAIN MENU appears on the screen.
MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION1
OPTI0N2
TEST PATTERN
SECURITY
NETWORK
SELECT ENTER
Select (highlight) the desired item with
the or buttons.
Selected items are displayed in blue.
MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION1
OPTI0N2
TEST PATTERN
SECURITY
NETWORK
SELECT ENTER
Press the "ENTER" button to enter your
selection.
The submenu for the selected option will now open.
(e.g. : PICTURE Menu)
PICTURE
PICTURE MODE
BRIGHT
CONTRAST
COLOR TEMP.
SHARPNESS
AI
SYSTEM
SELECT ADJ
Highlight the desired adjustment item
with the or
the parameter value with the
buttons.
(Example of separate adjustment screen)
BRIGHT
• If no button is operated for approx. 5 seconds
while a bar graph is displayed, the screen will
return to the previous page.
28
EXIT
EXIT
GRAPHIC
32
32
DEFAULT
06
ON
RGB
RETRN
buttons, then change
or
32
Returning to the previous
page
• Pressing the "MENU" button returns the screen to
the previous menu page.
• When the MAIN MENU is on the screen, pressing
the "MENU" button clears all menus from the screen.
Menu items shown in
transparent characters
• Some menu items may not be valid for certain
signal formats applied to the projector.
The menu items that cannot be adjusted or used are
shown in transparent characters, and they cannot be
selected even by pressing the ENTER button.

Menu items setting

• The bottom prompt line differs on each menu
depending on the selected menu option:
• A prompt " ADJ" appears when changing
the setting.
• A prompt " ENTER" appears for a separate
bar graph.
• When and buttons are displayed above or
under the items in the "OPTION" screen, they
indicate that there are more adjustment (items).
Resetting to the factory
default
STD (standard) button is used to reset all of the
projector adjustment values to the default levels
which were set at the time of shipment from the
factory.
PICTURE
PICTURE MODE GRAPHIC
BRIGHT 32
CONTRAST
32
COLOR TEMP. DEFAULT
SHARPNESS 06
AI
ON
SYSTEM RGB
SELECT ENTER RETRN
• If the parameter value on a bar graph is reset to
the factory default, the bar turns to white.
• The upper and lower triangular markings on
Note
a bar graph indicate the default setting for the
parameter. If no such triangular markings are
shown on the bar graph, the parameter
cannot be reset to the factory default.
I nd i ca te s th e cu rre n t
p a ra me te r va l ue .
In d ic a te s the
fa ct or y d efaul t.