Table of Contents
Advertisement
Clean all accessories after each use and let them dry. Use a soft cloth with warm water and
a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Accessories
12.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1
Turn off the oven and wait until it is
cold.
Step 2
Pull the front of the shelf support
away from the side wall.
Step 3
Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4
Install the shelf supports in the oppo‐
site sequence.
The retaining pins on the telescopic
runners must point to the front.
12.3 How to use: Aqua Clean
This cleaning procedure uses humidity to
remove remaining fat and food particles from
the oven.
Step 1
Pour water into the cavity embossment:
150 ml.
Step 2
Set the function:
12.4 How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal glass
panel to clean it. Read the whole "Removing and installing door" instruction before you remove
the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1
Open the door fully and hold both
hinges.
.
Step 2
1
Step 3
Set the temperature to 90 °C.
Step 4
Let the oven work for 30 min.
Step 5
Turn off the oven.
Step 6
Wait until the oven is cold. Dry the cavi‐
ty with a soft cloth.
Lift and turn the levers fully on both
hinges.
2
ENGLISH
17
Advertisement
Table of Contents
