Table of Contents
Advertisement
Procedure
Make sure that there are no obstacles and electromagnetic interference between the device and
the router for best possible wireless performance.
Step 1
Add the device.
1) Tap + button on the upper-right corner of the DMSS home page to scan the QR code
on the camera. If your DMSS fails to scan the QR code, tap Manually enter SN.
2) Select Wireless Camera.
Step 2
Configure the device hotspot.
If you connect the device with Ethernet cable, jump to Step4 directly.
1) Click ... on the upper right corner, and then choose Switch to AP configuration.
2) Go to Wi-Fi settings of your mobile phone, connect hotspot named DAP-xxxxxxxx.
3) Create the username and password for the device and then tap Next.
3 Operating with DMSS
Figure 3-1 Add the device
5
Quick Start Guide
Advertisement
Table of Contents
