Note: If an identical message is already saved in the
pre-defined messages list, a notification (nothing
changed) is displayed and the message is not stored.
SENDING A PRE-DEFINED MESSAGE
1. In idle mode, briefly press the
Text messages > Pre-defined messages menu entry.
2. Select the message you want to send.
3. Press the Send softkey.
If there is no address stored in the pre-defined message,
the address editor (see "Address Editor" on page 19) is
opened. Enter the address and press the Send softkey.
4. If you are sending the message to a telephone number,
select the message type: Normal message, Urgent mes-
sage, Normal job, Urgent job.
5. Press Ok to send the message.
Sending Text Messages / Jobs
softkey. Navigate to the
23