Message Editor; Text Editor; Address Editor - Mitel 700 User Manual

MESSAGE EDITOR

The message editor provides a two-step procedure to send
messages. First the text is entered in the text editor and then
the address is entered in the address editor.

TEXT EDITOR

Entered message text is auto-formatted. One message can be
up to 1,000 characters long. The number of remaining
characters is indicated in the headline. This indication applies
to the ASCII character set. Entering one special character in
different languages (which are not included in the ASCII
character set) cuts the number of remaining characters by two
or more.
When entering a message text:
• Use the number keys and the
• Use the
characters or to switch to entering numbers in the text. The
window in the display alternates between A, a, 123, Aa to
indicate the operation mode. A long press on a number key
while entering text allows you to enter the number.
• Use the
key deletes the entire message or number/address.

ADDRESS EDITOR

When entering the message address, use the
between numbers and text (e.g., to enter an e-mail address).
Sending Text Messages / Jobs
key to switch between upper and lower case
key to delete characters. A long press on the
key to enter the text.
key to switch
19