Mitel 700 User Manual page 33

3. Press the Change softkey to change the current volume
setting.
4. Set the volume. Use use the
or enter a number (1 ... 7).
Select Off to deactivate the volume setting (Normal
message and Urgent message only).
When Increasing is activated (Alarm message only), an
alarm message is signalled with increasing volume.
5. Press the Ok softkey to save the volume setting.
6. Briefly press the end key
Note: If you have switched off the ringer volume (in the
Audio > Ringer settings > Volume > Ringer menu),
the icon is displayed in the icon line. There is no
audible signal to indicate incoming calls and receipt of
low priority, normal, or urgent messages. However,
alarm messages and locating alerts are accompanied
by an audible signal.
Setting Options for Messages Receipt
to close the menu.
and navigation keys
29