Table of Contents
Advertisement
call back at the push of a button. Messages are sent either
from a central site or from DECT phone to DECT phone.
SENDING A PAGING MESSAGE
1. In idle mode, press and hold the
System menu, or briefly press the
the System menu.
2. Select Paging and press Ok.
3. Enter the call number of the recipient (target) under Edit
number or select a number from the Central directory /
Personal directory.
4. Press Ok.
5. Enter the call-back call number which the recipient is to
call back under Edit number or select a number from the
Central directory / Personal directory.
6. Press Ok.
When sent successfully, you see an acknowledgment display
which you must confirm with Read. When sending the paging
message from DECT phone to DECT phone, the message is
sent to the recipient as a "Normal message". When sending
paging messages from a central site (system server) the type
of message may be different (e. g., "Job").
RECEIVING A PAGING MESSAGE / CALL-BACK
The text of the paging message is automatically generated by
the system. The message received indicates that a call-back
is desired. When you receive a paging message, press one of
the following:
•
the call key
called back immediately. The message itself is saved in
your Inbox list
. The call number within the message is
Special Functions
softkey to access the
softkey and select
33
Advertisement
Table of Contents
