Cleaning With The Cleaning Brush; Cleaning With Running Water - Silvercrest SHBS 800 A1 Operation And Safety Notes

Do not use aggressive or abrasive cleaning agents.
Wipe down the product with a slightly damp cloth.
If you are not using the product for extended periods, store it in
the storage bag

Cleaning with the cleaning brush

Switch the product off using the ON / OFF button
attachment
product, remove it before cleaning as described in the chapter
"Changing the attachments". Open the cutting unit
the trimmer with your thumbs from the front (see Fig. F).
Use the cleaning brush
area behind the cutting unit

Cleaning with running water

Switch the product off using the ON / OFF button
the power adapter
tachment
15
remove it before cleaning as described in the chapter "Changing
the attachments".
Wash the cutting unit
running water.
Allow all parts to dry thoroughly.
Use the enclosed cleaning brush
trimmings from the cutting unit
24 GB/IE/NI
.
17
or comb attachment
15
to clean the cutting unit
18
from the socket if necessary. If precision at-
14
or comb attachment
and the attachments
1
is attached on the
16
(inside the housing).
1
is attached on the product,
16
to remove any remaining hair
18
.
1
. If precision
4
by pressing
1
and the
1
and unplug
4
, under
15 16