Assembly Procedure - Panasonic LUMIX S-E2470 Service Training Manual

6.2.2.

Assembly Procedure

Important notice：
When tightening the screw, use a torque driver (RFKZ0542) with specified torque described in each step.
6.2.2.1. Installation of 6-7th Lens Frame Unit
1. Install 6-7th Lens Frame Unit.
FPC Plate
2. Install Cam Pin and tighten 3 screws (K) by using the torque driver with specified torque.
Screw
Cam Pin
Torque
Screw (K)
& Cam Pin
12.0 ± 1.0 N ・cm
6-7th Lens Frame Unit
Screw (K)
& Cam Pin
15
Screw (K) ｘ 3
7