4.2.11. Removal of the 1st lens holder unit
and the Cam barrel unit
1. Rotate the Cam barrel unit clockwise when you watch it
from back.
4.3.
Assembly procedure
Important:
When tightening the screw, use a torque driver (RFKZ0456)
by ordering the screwing order with specified torque
described in each step.
4.3.1.
Installation of the Filter ring
1. Tighten 3 screws (A) in numerical order by using the
torque driver with specified torque.
(Torque Driver : RFKZ0456)
(Torque : 7±1N ・ cm)
15