Assembly Procedure - Panasonic Lumix H-FS14140 Service Training Manual

6.2.2.

Assembly Procedure

Important：
When tightening the screw, use a torque driver
(RFKZ0542) by ordering the screwing order with
specified torque described in each step.
6.2.2.1. Installation of the 5th Lens Frame2 Unit
1. Install the 5th Lens Frame2 Unit after aligning
phase mark (Δ).
5th Lens Frame2 Unit
Phase mark (∆)
6.2.2.2. Installation of the 3rd Lens Frame3 Unit
1. Install the 3rd Lens Frame3 Unit.
3rd Lens Frame3 Unit
2. Installation notice：
Do not forget to insert each FPC to each FPC slit.
Insert
Insert
FPC Slit
6.2.2.3. Removal of the 2nd Lens Frame Unit
1. Install the 2nd Lens Frame Unit after aligning
phase mark (Δ).
2nd Lens Frame Unit
Phase mark (∆)
6.2.2.4. Installation of the Direct Frame
Shading Sheet
1. To put the Direct Frame Shading Sheet so that a Gap
between the 2nd Lens Frame Unit and the Cam Barrel
is hidden.
Direct Frame Shading Sheet
14