Related Manuals for Panasonic H-HS030PP
Summary of Contents for Panasonic H-HS030PP
- Page 1 Order No.DSC1504011CE Interchangeable Lens for Digital Camera H-HS030PP Model No. H-HS030E H-HS030GK © Panasonic Corporation 2015 Unauthorized copy- ing and distribution is a violation of law.
-
Page 2: Table Of Contents
TABLE OF CONTENTS PAGE PAGE 1 Service Navigation------------------------------------------------3 1.1. Introduction --------------------------------------------------3 1.2. Important Notice --------------------------------------------3 2 Operating Guide ---------------------------------------------------4 2.1. Before Use ---------------------------------------------------4 2.2. Cautions For Use-------------------------------------------5 2.3. Components -------------------------------------------------6 3 Service Fixture and Tools --------------------------------------8 3.1. Service Fixture and Tools --------------------------------8 3.2. -
Page 3: Service Navigation
1 Service Navigation 1.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by supplement service manual. 1.2. -
Page 4: Operating Guide
2 Operating Guide 2.1. Before Use... -
Page 5: Cautions For Use
2.2. Cautions For Use... -
Page 6: Components
2.3. Components 2.3.1. Accessories... - Page 7 2.3.2. Attaching/Detaching the Lens...
-
Page 8: Service Fixture And Tools
3 Service Fixture and Tools 3.1. Service Fixture and Tools The following Service Fixture and Tools are used for Checking & Servicing for this unit. 3.2. Clean Box • The repair quality is considered, and it is recommended working in the environment of satisfied clean level less than class 10,000 (Federal Standard 209D). -
Page 9: Disassembly And Assembly Procedure
Disassembly and Assembly Procedure 4.1. Outline It is recommended dealing with clean box, to keep maintaining the dustproof environment. (Refer to “3.2. Clean Box” section of this service manual for details.) Important: 1. When servicing the enclosure part (refer to Fig. W1), it must be performed inside of satisfied clean level. (Satisfied clean level: Less than class 10,000 (Federal Standard 209D)) As for procedure, refer to the “5 Maintenance”... -
Page 11: Disassembly Procedure
4.2. Disassembly procedure 4.2.2. Removal of the L mount unit 1. Remove 1 screw (B) and 4 screws (C). Important: It must be performed inside of satisfied clean level. (Satisfied clean level: Less than class 10,000 (Federal Standard 209D)) 4.2.1. Removal of the Shading frame 1. - Page 12 4.2.4. Removal of the Rear frame unit 4.2.6. Removal of the Lens P.C.B. unit and the Mount contact unit 1. Remove 1 screw (D). 1. Disconnect 4 connectors. 4.2.5. Removal of the Earth plate 4.2.7. Removal of the Mount contact unit 1.
-
Page 13: Assembly Procedure
4.3. Assembly procedure 4.3.3. Installation of the Earth plate 1. Tighten 1 screws (E) by using the torque driver with spec- Important: ified torque. When tightening the screw, use a torque driver (RFKZ0456) (Torque Driver : RFKZ0456) by ordering the screwing order with specified torque described in each step. - Page 14 4.3.5. Installation of the Mount washer 4.3.6. Installation of the L mount unit 1. Install the Mount washer. 1. Tighten 4 screws (C) in numerical order by using the torque driver with specified torque. (Torque Driver : RFKZ0456) (Torque : 21.6±2.2N ･ cm) And, tighten 1 screw (B) by using the small driver.
- Page 15 4.3.7. Installation of the Shading frame 1. Tighten 3 screws (A) in numerical order by using the torque driver with specified torque. (Torque Driver : RFKZ0456) (Torque : 6.9±0.7N ･ cm)
-
Page 16: Maintenance
5 Maintenance 5.1. Lens Cleaning 5.1.1. Dust / Dirt on the outer casing part(s) 1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush. 2. Wipe up the Outer casing part with the dry fuzz-free cloth. 5.1.2.